Neulog, Conductivity Logger Sensor

This logger sensor is based on a probe with two flat electrodes with known surface area and distance between them. A signal is supplied to the electrodes and by testing the signal behavior, the conductivity of the solution is calculated. The logger sensor has three ranges for displaying the solution conductivity: Γõ¼Γòís/cm ╬ô├ç├┤ micro Siemens per centimeter, mg/L ╬ô├ç├┤ milli gram per Liter, ppm - part per million. *Requires connection hardware, sold separately. Experiment Duration: 1 second to 31 days. Operation Modes: Range | ADC Resolution | Resolution. Max Sample Rate (S/sec): 0-2000 Γõ¼Γòís/cm, 10 bit, 0.1 Γõ¼Γòís/cm, 100, 2000-20000 Γõ¼Γòís/cm, 10 bit, 1 Γõ¼Γòís/cm, 100, 0-1000 mg/L, 10 bit, 0.1 mg/L, 100, 1000-18000 Γõ¼Γòís/cm, 10 bit, 1 mg/L, 100, 0-1000 ppm, 10 bit, 0.1 ppm, 100, 1000-18000 ppm, 10 bit, 1 ppm, 100.